Introduction

Your epoxy resin table is a stunning centerpiece—but how do you keep it looking flawless for years? Proper care prevents yellowing, scratches, and cloudiness. This simple, step-by-step guide covers daily cleaning, protective measures, and professional restoration tips.

---

Daily & Weekly Maintenance

1. Cleaning Do’s & Don’ts

✔ Do:

• Use a microfiber cloth + mild dish soap
• Wipe spills immediately (especially alcohol/acidic liquids)
• Dry with a soft towel to prevent water spots

❌ Don’t:

• Use abrasive cleaners (Windex, bleach)
• Scrub with rough sponges
• Place hot items directly on surface (use trivets)

2. Dust & Debris Prevention

• Weekly: Dust with an electrostatic cloth
• Monthly: Apply furniture wax (for UV protection)
• Tip: Use placemats under dishes to avoid micro-scratches

---

Long-Term Protection

3. Avoiding Yellowing

• UV Exposure: Keep out of direct sunlight or use UV-resistant window film
• Heat: Never exceed 120°F (use coasters for hot pans)
• Solution: Apply automotive-grade ceramic coating ($50 kit, lasts 2+ years)

4. Scratch Repair

For Light Scratches:

1. Sand with 1500→3000 grit wet/dry sandpaper
2. Polish with non-abrasive car polish
3. Buff with a microfiber cloth

For Deep Scratches:

• Consult a professional for resin re-pouring

---

Seasonal Deep Cleaning

5. Annual Refresh

1. Clean: Wash with soapy water, then isopropyl alcohol (50/50 mix)
2. Sand: Lightly hand-sand with 2000 grit
3. Polish: Use a high-gloss furniture polish
4. Protect: Apply paste wax or ceramic coating

---

Emergency Fixes

6. Stubborn Stains

7. Cloudy/Hazy Finish

• Cause: Moisture trapped during curing or cheap resin
• Fix: Lightly sand + recoat with thin epoxy layer

---

Pro Tips from Furniture Makers

• Rotate decor to prevent uneven sun exposure
• Use felt pads under heavy objects
• Avoid dragging items across surface
• For outdoor tables: Reapply marine varnish yearly